Double Glazed Window Repair

Most double glazed windows come with a guarantee, and it’s important to know what it covers. In general, it covers issues with the hardware of the window including hinges and locking mechanisms – in the first 10 years.

A leak in the seal can be the cause of mist between your glass windows. This should be fixed immediately to avoid mold or damp growing in your home.

Condensation Between the Windows

If you notice condensation appearing between your windows, it is an indication that the seal in the gases that insulate the window has failed. This is a serious problem that must be dealt with immediately, particularly in winter when the humidity levels are at their highest. This could also cause damage to sills, sealant and mould.

Ideally double-glazed windows should not experience condensation between the panes. However, it is not common to have high humidity or an extremely cold snap to trigger this problem. Fortunately, it is repairable without having to replace the entire window. A professional can drill small holes into the glass and then spray the inside of the window with a special cleaning solution. The water is then removed from the window. Additionally, an anti-fogger is fitted to prevent future moisture buildup.

Condensation may also occur between the windows due to air leakage, or other causes outside the window. In this instance, it may take longer for moisture in the window to build up, since the air must be warm enough to vaporise the water molecules. In these situations it is more beneficial to replace double-glazed windows rather than attempt to repair the sealed units.

A double-glazed glass window comprised of two or more pieces of tempered insulated glass, which are joined by a metal frame. The gap in the middle of the windows is filled with a non-toxic gas for insulation like argon or krypton, and then sealed tightly. The seal is responsible for preventing the insulating gas from escaping and also prevents air and moisture from getting into the gap.

As windows age, seals may deteriorate allowing moisture to leak between the glass panes. When seals fail, it is important to notice this because it indicates that the double glazing no longer performs as well as before. This can result in poor energy efficiency, a rise in heating costs, a damaged properties and the risk of condensation between the windows.

Mist

If you have condensation on the outside of your windows this is totally normal – it means that your double glazing is in good working order and retaining the heat inside your home. The condensation develops because the air outside is warmer than the glass and reaches its dew point before the window. This is one of the major benefits of having good quality double glazing.

If the condensation is located on the inside of your window, this can be a sign of a problem with the ventilation in your home. The excess moisture won’t go anywhere else and will end in the carpet, window, furniture, and other areas of your home. It is possible to prevent this by having it inspected by a professional and making sure that there is plenty of fresh air inside your home.

Another reason for mist on double-glazed windows is because the seal between two panes of glass has broken. This can be caused by wear and tear, or through the use of chemical cleaning solutions. If this happens, the best option is to repair the windows as soon as you can.

Professionally repairing your windows will ensure that they are fog-free free of condensation and free of misting. This is also much cheaper than replacing your windows and you will save money on your energy bill.

A FENSA registered window installer can provide you with a quote for repair or replacement of your double-glazed windows. If your windows are quite old and have been in use for a while you might want to consider upgrading them to A-rated energy efficient ones.

It is a very good idea to keep copies of any warranties and agreements with your window fitting company. This can be extremely helpful in the event that any issues with your windows occur in the future, and you are able to then contact your fitters to resolve the issue. This is better to ignore the issue which could cause more problems for your home.

Open or close with difficulty

It’s not only annoying when double-glazed windows are hard to open or close. They can also lead to more expensive energy bills due to heat loss and draughts. It can also be a security problem, particularly if the locks aren’t working properly. It is vital to fix any problems with double glazed windows and doors immediately you discover them.

If you have tried opening your window using the most basic methods, like using an electric screwdriver or tapping the frame with a solid object, the problem could be more serious. It could be that the window is sagging within its frame and requires to be re-set or it could be that there is a gap between the glass panes and frames. In either case you should seek out a double glazing repair specialist to ensure the repairs are done correctly and to prevent any further problems.

It is not unusual for upvc window repairs near me window handles and lock mechanisms to become difficult to operate or get stuck, especially if they are old and worn. It is usually caused by a build-up of dirt or grease inside the handle. This is easily fixed by cleaning it with a upvc windows repair near me cleanser. If this does not work, you can try tapping the upvc windows repair using the help of a screwdriver. Be careful not to harm the handle or the window handle mechanism.

If this does not resolve the issue, then the window may need to be replaced as it is likely that the hinges aren’t properly aligned or the locking mechanisms are damaged. In this case you should seek out a professional UPVC window repair expert.

David The Window Wizard is a specialist in double-glazed window and door repairs, including fixing double-glazed windows that have been blocked or locked. He has extensive experience with changing old window mechanisms to modern ones. He can often save you the cost of replacing the whole window. For more information or to book an estimate, call or email us today.

Warping

Double-glazed windows are an excellent way to save energy in your home. They are made up of two distinct panes with a spacer, gas or air between the panes, which creates an airtight seal that keeps cold air out and warm air in. However with time, these windows can be damaged or destroyed and require repair. The majority of these repairs can be made without having to replace the entire window.

One common problem that double glazed windows experience is warping. This occurs when windows begin to flex, twist or bow. This can affect the structural integrity and insulating capabilities of the window. Double-glazed windows must be properly installed and maintained to avoid this issue.

Contact a specialist when you realize that your double-glazed windows are sagging. This will help to prevent the situation from getting worse. They will be able to inspect your windows and identify the cause of the warping. They will employ special tools to fix your issue and ensure that your windows are completely sealed.

Water vapour can trigger this problem, as it can build up between the windows over time. It can be caused by many different reasons including weather conditions, humidity and temperature variations. To address this issue, the specialist will drill a tiny hole to release moisture. They will then use an agent to clean the glass and apply sealant to help protect it from moisture in the future.

If windows aren’t able closed or opened, this may be a sign of a problem with the mechanism or hinges. It is worth trying to lubricate the parts of the window prior to calling a professional as this may resolve the issue and lessen the necessity for replacements. If your windows are worn out or don’t offer the insulation you desire It may be better to replace them.