Choosing Upvc Window Replacement Hinges

It’s not as difficult as it may seem to choose and fit the replacement hinges made of upvc. It is crucial to ensure that the arrows on the hinges are facing the correct way and the thickness (13mm or 17mm) of the hinge arm that is on the opening frame.

There are many different kinds of hinges, each with their distinctive characteristics. This article will discuss the most popular uPVC hinges, and their advantages.

Egress/Easy Clean Hinge

These windows are an excellent choice to replace or upgrade your fire escape safety window because they can open to a full 90 degree angle. They can be disengaged to an easy-clean position, allowing you to access the outside of windows without having to climb ladders or lean over dangerous angles.

These egress hinges are heavy-duty and are manufactured by Yale which is among the most popular and reliable home security brands on the market today. They work with all types of uPVC side-hung windows. By pressing a small button the window sash will be moved to the side, and then into the position that is easy to clean. When the window is closed, the sash will revert to its original position.

They are available in both 13mm and 17mm stack heights. Depending on the size of your existing window, we recommend using our Egress Selection Guide to determine which one is the best fit for you.

The hinges are designed to be used with standard side-hung frames, either uPVC or aluminium. The friction screw is used to adjust the resistance. This makes it easier to open the window and reduces the chance of an accidental closure during strong winds. They have been tested for over thirty thousand cycles, and they are compliant with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.

The Nico Egress Easy Clean friction hinge is easy to operate and doesn’t have any buttons or catches. It is a simple and secure solution for emergency exits and cleaning. First, open the window to the egress (full opening) position and then press the hinge retaining clip on the inner side of the bottom corner. This will open the bottom and top catches, allowing you to move the sash into an easy-clean position. Once it is in the easy-clean position, close the window to return the hinges to their egress positions.

Fire-Escape Hinge

Fire Escape Hinges (also known as “Easy Clean”) are used to replace windows that open sideways to ensure fire safety. These hinges permit a larger opening in the event of a fire. Building regulations stipulate that this type of hinge must be installed in any habitable space with a window.

They have a unique friction stay that allows the window to open at a 90 degree angle and allows the opening sash to slide across when open to allow easy cleaning of the exterior side of the glass, without having to use ladders. The hinges aren’t flimsy buttons or catches and are operated with an easy, secure lever that is accessible from the inside of your home.

The hinges, made in the UK by Cotswold are fitted with a child safety feature for everyday use. This can be removed by a hidden button. You will have peace of assurance that your children won’t accidentally open the doors too far. They are available in 13mm and 17mm stack heights.

Find the length of the current side-hung window hinge, which is fixed to the frame. (See the guide for measuring the size of Upvc window hinges). Choose the right size hinge below.

Please note that the measurement is taken from the part that is fixed to the frame not the sash. The actual hinge length could be shorter or larger based on the manufacture of your old windows. Also, when selecting the width of your hinge, most upvc windows will fit a 13mm stack height. However, should your old frame is 17mm wide, you should select the option for this. You can also utilize the 4mm packer to make up for the difference. All hinges come in pairs (1 left and 1 right). Screws are not included with the hinges. If required, these screws can be purchased separately. We suggest using our upvc window hinge repair screws. These are specially designed to improve the performance of your hinges and allow them to function smoothly for a longer time. They have a reduced-friction design and an enhanced weather seal that includes a nylon reducer cap.

Restricted Hinge

Standard hinges can make it difficult to open windows fully. The restricted child safety friction hinges can help overcome this issue and provide a solution when ventilation is needed but access to clean up or escape in case of fire is not feasible. They work by restricting the amount of sash that can open and allowing the control of this limitation with an option. They work with both side and top-hung windows and come in 17mm and 13mm stack heights.

The Nico Restricted Egress Friction Hinges combine the advantages of a standard restrictor and a fire escape pivot to provide a simple but efficient method of complying with building regulations. It is available in 13mm and 17mm stack heights and can be used for both side and top opening uPVC window. It comes in a pair, with one hinge being the one with restricted egress and the other being the unrestricted. This lets one hinge be installed at the bottom and the other is installed at the top.

These upvc door hinges restrictive hinges have been tested to BS6375 part 2. They are intended for use on a window that isn’t able to be fully opened, such as a small children’s bedroom. The mechanism limits how far the sash can open to an appropriate height of 100mm and then re-engages when the window is closed.

These uPVC friction-type hinges can be used with any type of windows. They are especially useful for windows that are hard to reach, such as those in three-storey apartments or those which would require ladders. They can be upgraded by our security features, including hinge guard protection plate or dog bolts, to achieve PAS 24 performance.

When replacing hinges on double glazed windows a hinge on a pvc window hinges, it is important to determine the length of the current hinge so you can get replacements that are comparable in size. This can be done by looking at the picture gallery of the hinge and then deciding where you want it positioned. Top hung hinges can be restricted on both sides, while side hung hinges can only be used to one side.

Standard Hinge

A standard hinge repair plate is made of metal-to-metal contact, and there are no additional parts to reduce friction. It comes in a variety of finishes and has a fire rating. To quickly determine the radius of hinges, lay it out flat and align a quarter and dime in two corners. If the dime fits better, the corner is rounded by 1/4 inch. If the quarter fit better, it’s rounded to 5/8 inch.

The right hinge can make or break your door hinge repairs‘s appearance. It’s essential to match the style and finish of your door with its hinges for a cohesive look that’s both functional and visually attractive.